Home / Acoustic enclosures / LabNoise Meter

LabNoise Meter · Free tool

How loud is your lab?

--dB(A)Ready to measure
Where are you measuring?
  • Works on iPhone only: on Android every model measures differently and the figure would not be reliable.
  • No sound is recorded or leaves your phone: it is analysed on the phone itself.
How to measure well
  1. Stand 1 metre from the equipment, or at your workstation.
  2. Hold the iPhone without covering the microphone (at the bottom).
  3. Don’t talk during the 10 seconds.
  4. If Bluetooth headphones are connected, disconnect them.

Measure it in 10 seconds with your iPhone, next to the pump, chiller, gas generator or any other noisy equipment. You will see the approximate decibels, what they compare to and how much an enclosure would bring them down.

Enclosure finder

Which enclosure does your equipment need?

Type the model of your pump, chiller or generator and see the compatible ZenBox enclosure, according to the manufacturer’s datasheets.

  • 128 equipment models in the datasheets
  • We confirm each case before the proposal
  • Reply within one business day
How it works

What it measures and how reliable it is

10 seconds

A 10-second average

Like a sound level meter, it calculates the average level (LAeq) with A-weighting, the one used for noise at work.

Indicative

An approximate reading

An iPhone is not a sound level meter, so take it as a guide. It does not replace a professional measurement: to assess a workstation, ask your health and safety specialist.

Private

Nothing is recorded

The sound is analysed on your phone and is neither stored nor sent. For the site statistics we only keep the decibel figure, with no personal data.

iPhone only

Why iPhone only

It runs in the iPhone’s browser (Safari or Chrome), with nothing to install. iPhone microphones vary little from one model to another; on Android, every model measures differently.

By type of equipment

Which equipment is the loudest?

Measure next to each one and see which enclosure fits it.

FAQ

What people usually ask us

How reliable is the reading?

It is indicative. The iPhone microphone is not a calibrated sound level meter. It tells you whether your lab is quiet, normal or noisy, and lets you compare before and after. It does not replace a professional measurement: to assess the noise at a workstation, ask your health and safety specialist, who will measure with a calibrated sound level meter.

What does dB(A) mean?

Decibels with A-weighting, which weights each frequency the way the ear perceives it. It is the unit used by workplace noise rules. Every 10 dB more sounds roughly twice as loud.

What does the German rule ASR A3.7 say?

It sets a maximum of 70 dB(A) for laboratory work and 55 dB(A) for tasks that demand high concentration, such as scientific work. It refers to the average level during the task. It is a German rule; other countries may use different references.

Is the sound recorded?

No. The sound is analysed on your phone while you measure and is neither stored nor sent. The microphone switches off when the measurement ends.

How much quieter does a ZenBox enclosure make it?

Up to 20 dB(A) according to the manufacturer: about four times quieter. It installs in 4 steps, without tools and with the pump running.

Why does it only work on iPhone?

iPhones use very similar microphones from one model to the next, so one setting works for almost all of them. On Android every maker and every model uses its own microphone and setting, so the reading can vary a lot from one phone to another. We would rather not give you a figure that could be badly wrong.

Does it work for the noise of a chiller, a nitrogen generator or a compressor?

Yes. It measures the same next to any equipment: vacuum pumps, chillers, gas generators such as nitrogen generators, compressors or ultrasonic baths. Stand 1 metre from the loudest one and compare with the rest of the lab.

Does silent mode or Do Not Disturb affect the reading?

No. Silent mode and Do Not Disturb only mute the phone’s alerts; the microphone measures the same. What does help is disconnecting Bluetooth headphones before measuring, so the iPhone uses its own microphone.

Is a pump too noisy?

Tell us which equipment it is and we’ll send you the compatible enclosure and a quote.

Find my enclosure ↓Request a quote